| Availability: | |
|---|---|
Synonyms | 2-Allylhexafluoroisopropanol; Allyl HFIP; BTHB |
Molecular Formula | C₆H₆F₆O |
Appearance | Colorless to light yellow clear liquid |
Molecular Weight | 208.10 g/mol |
Boiling Point | 97 ℃ |
Density | 1.36 g/mol |
Flash Point | 45 ℃ |
Refractive Index | 1.33 |
Specific Gravity | 1.38 (20/20 ℃) |
Storage Conditions | Stored in a cool, dark place (ideally below 15 °C) under an inert gas atmosphere |
Purity | ≥99% |
Analytical Methods | ICP-MS /ICP-OES /relevant assay method |
Package Information | 100g, 500g, 1kg, or customized |
1,1,1-Trifluoro-2-(trifluoromethyl)-4-penten-2-ol is a practical fluorine-containing building block used in the preparation of functional monomers and specialty polymers. Unlike common hexafluoroisopropanol (HFIP), it contains an allyl group, which provides an additional site for chemical modification.
Dual-functional structure: Combines a fluorine-containing tertiary alcohol group with a terminal carbon-carbon double bond, allowing for further chemical modification.
Photoresist resin intermediate: Can be used to prepare fluorine-containing monomers required for polymers in immersion lithography photoresists.
Functional polymer building block: Provides a pathway for incorporating hexafluoroisopropanol-based moieties into specialty organic materials.
1,1,1-Trifluoro-2-(trifluoromethyl)-4-penten-2-ol can serve as a starting material in certain synthetic routes for the preparation of fluorine-containing resins used in immersion photoresists.
This compound can be utilized to synthesize fluorine-containing intermediates, which are subsequently converted into methacrylate monomers and incorporated into photoresist resins.
The molecular structure of Allyl HFIP possesses two useful functional features: a terminal alkene group and a fluorine-containing hydroxyl group. The terminal double bond can undergo chemical transformation to form new functional groups, while the hexafluoroisopropanol moiety remains intact within the resulting compounds.
This makes the compound a practical starting material for the preparation of fluorinated monomers and derivatives required for the development of specialty polymers.
1,1,1-Trifluoro-2-(trifluoromethyl)-4-penten-2-ol is a colorless to pale yellow, transparent liquid with a boiling point of approximately 97 °C. Its volatility and flammability must be taken into account during storage, transport, and chemical synthesis.
When using this substance to synthesize fluorine-containing monomers, appropriate liquid-handling equipment should be employed, and unnecessary exposure to air or heat sources should be minimized.
Available packaging options include:
Sealed bottles or ampoules
Stainless steel precursor containers
ALD/CVD bubblers
Customized container and valve configurations
Specific packaging arrangements will be confirmed during the quotation stage.
1,1,1-Trifluoro-2-(trifluoromethyl)-4-penten-2-ol is a flammable liquid; therefore, extra care must be taken during its storage and handling. It should be stored in a cool, dark place (ideally below 15 °C) under an inert gas atmosphere.
Keep the container tightly sealed when not in use.
Store in a cool, well-ventilated area, away from direct sunlight.
Keep away from heat sources, sparks, open flames, and other ignition sources.
Avoid contact with strong oxidizing agents.
Ensure adequate ventilation and implement anti-static measures.
Wear appropriate protective gloves and safety goggles.
1. Is 2-Allylhexafluoroisopropanol the same as 1,1,1-trifluoro-2-(trifluoromethyl)-4-penten-2-ol?
Yes. Both names refer to the same compound, which has the CAS number 646-97-9 and the molecular formula C₆H₆F₆O. It is also commonly referred to as Allyl HFIP or BTHB.
2. Can Allyl-HFIP be used to prepare conductive polymer materials?
Yes. This compound can be incorporated into functional conductive polymers for use in the field of chemical sensors.
3. Is 1,1,1-trifluoro-2-(trifluoromethyl)-4-penten-2-ol flammable?
Yes. This compound is a flammable liquid with a flash point of 45 °C. It should be kept away from sources of ignition and handled in a well-ventilated environment.
For product analysis reports (such as COA) or procurement consulting, please feel free to contact us at jomin@wolfachem.com at any time.
If you would like to obtain the SDS for this product, simply send an email to jomin@wolfachem.com. You will then receive it.
If you would like to obtain the COA for this product, simply send an email to jomin@wolfachem.com. You will then receive it.